11
3 Product description
VEGABAR 54 • Profibus PA - climate compensated
36790-EN-130321
You can find additional information in the supplementary instructions
manual "
Flanges according to DIN-EN-ASME-JIS
" (Document-ID
31088).
The measuring instrument holder is used for wall/tube mounting of
VEGABAR series 50 pressure transmitters and VEGAWELL 52 sus-
pension pressure transmitters. Supplied reducers enable the adapta-
tion to different instrument diameters. The material used is 316L.
The protective cover protects the sensor housing against soiling and
intense heat from solar radiation.
You will find additional information in the supplementary instructions
manual "
Protective cover
" (Document-ID 34296).
The electronics module is a replacement part for pressure transmitter
VEGABAR. One version is available for each type of signal output.
You find further information in the operating instructions "
Electronics
module VEGABAR series 50 and 60
" (Document-ID 30175).
Measuring instrument
holder
Protective cover
Electronics module