Vega U2020, Руководство пользователя

Страница: 6 / 20

6 Vega U2020 UHF
+
Slide the hinged battery cover open. Insert a 9-volt
battery into compartment as shown above. Slide cover
back on.
1 + 0 = Channel 10
Remove channel switch cover from the mic. Hold mic head to
the right. Use a small screw driver to set the channel
frequency. When setting channel, mic head MUST be to
the right!
Mic: comes with either a
N/D267,N/D55
57,N/D767,or N/D967 head.
Audio Mute Switch: Turns audio on
and off without turning mic power off.
Audio is on when switch is pushed
toward the windscreen.
Channel Selectors: Remove cover, use
a small screw driver to change channels
(frequencies). Selected channel must be
the same as its associated receiver’s
channel.
Power Switch: Turns battery power on
and off. Power is on when switch is
pushed toward the windscreen.
Audio Gain Control (side): A
small screwdriver may be used
to increase/decrease audio gain
(turn clockwise for higher gain).
Battery Low/Audio Peak LEDs:
When the mic is operating
properly, the LEDs remain off.
Lights when the battery becomes
low (green LED) and when audio
overload occurs (red LED).
Handheld Mic Controls and Indicators
To Insert the Battery
To Set the Channel Frequency