Vega OPR800, Руководство пользователя

Страница: 16 / 19

15
7.
DEFAULT
OPENING PROFILE (M0)
PAR. TST800 Description Default
o0 Start opening acceleration ramp 02
o1 End opening acceleration ramp 45
o2 Start opening deceleration ramp 55
o3 End opening deceleration ramp 98
o4 Coupling cam opening speed 08
o5 Maximum opening speed 60
o6 End opening speed 08
o7 Learning speed 12
CLOSING PROFILE (M1)
PAR. TST800 Description Default
c0 Start closing acceleration ramp 98
c1 End closing acceleration ramp 55
c2 Start closing deceleration ramp 45
c3 End closing deceleration ramp 02
c4 Additional run closing for mobile coupling cam 01
c5 Starting closing speed 08
c6 Maximum closing speed 40
c7 End closing speed 08
c8 Speed during the initial synchronization 10
TORQUES (M2)
PAR. TST800 Description Default
F0 Brake 50
F1 Limit Torque 20
F2 Stationary opening torque 01
F3 Stationary closing torque 01
F4 Security Torque in closing 35
F5 Security Torque in opening 40
OPTIONS (M3)
PAR. TST800 Description Default
S0 Safety reopening system in closing Slave (00)
S1 Safety reopening system in opening Disabled (00)
S2 Command type (Master/slave) Slave (00)
S3 Motor rotation (forward/reverse) Forward (00)
S4 Auto racing Disabled (00)
S5 Photocell Mode Slave (00)
MECHANICAL PARAM. (M5)
PAR. TST800 Description Default
M1 Motor Type 03
M2 Pulse/cm 06
LIGHT CURTAIN PAR. (M6)
PAR. TST800 Description Default
G0 Light Curtain ON NO (00)
G1 Anti vandal time 60
G2 Security Test NO (00)
G3 Timeout security test 800 (80)
G4 Acoustic signal during Nudge command YES (01)
G5 Acoustic signal during obstruction NO (00)
EN81-20/50 PARAM. (M7)
PAR. TST800 Description Default
P0 Enable Reopening when the CLOSE command is OFF NO (00)
P1 Space of reopening (cm) 02
P2 Waiting time before of the repening (sec) 08
P3 Final space (cm) in which the limit switch is active 04