M-BUS-2 / User Manual
9
Revision 07 - 14 September 2020
INITIAL STARTUP
The M-BUS-2 converter is powered from the built-in battery. In case of disconnect
battery, you need to connect the battery to the one of the two power connectors on the board.
The converter supports two activation methods in the LoRaWAN network - ABP and
OTAA. Select one of the methods using “Vega LoRaWAN Configurator” application (See part 4).
1. ABP. After pressing the start button, the device immediately starts working in the
"Active" mode.
Power connectors
