M-BUS-2 / User Manual
21
Revision 07 - 14 September 2020
«MBUS-2» TAB
The “MBUS-2” tab contains the settings of the connected device.
Current state
– displays the current parameters of the device - the internal temperature
of the device and the battery level.
M-BUS settings
– allows to setting M-BUS interface, set the model and addresses of
connected heat meters. M-BUS-1 uses the secondary addresses for poll of the connected
devices. The secondary address usually is equal to meter serial number.
Data transmission settings
– a group of parameters that allows you to configure the
collection and transmission periods, and the time zone for the internal clock of the device will
be set which. The readings are read from the connected device at 00.00 on the internal clock of
the device if the data collection period is set to 24 hours, at 00.00 and at 12.00, if the period is
12 hours and so on. All readings are stored in the device memory until the next communication
session.