Vega MT X CAN / User Manual
29
Revision 13 of 27.09.2021
From the side of the monitoring device, you should also configure the interface for working
with the tachograph. To do that you need to connect to the device through the "Configurator"
program and go to the "Settings" menu -> "Tachograph" tab.
BLE-SENSORS
Operation with BLE sensors is supported both of Int v2 and Ext v2 models, as well as
devices of Int and Ext models with a firmware version of at least 0.10b rc41.1 and a
firmware version of the GSM modem MC60E ... (after the number 60, there must be a
letter E). It is also worth considering that Bluetooth does not work without a SIM
card and whenever if the GSM modem is disconnected
Up to 10 sensors can be connected. For this it is necessary to connect to the device through the
“Configurator” program, go to the “State” menu -> “BLE Sensors” tab -> “Scanner” tab. There you can make
Bluetooth scanning and create sensor from the list of discovered sensors as a result of scanning by context
menu or button “Create BLE-sensor”.
Supported types of BLE-sensors.
BLE beacon – MAC binding tag;
Neomatika ADM31/ADM35 – sensor of temperature, humidity, ambient light level;
Neomatika ADM32 – angle sensor;
Escort TD-BLE – fuel level sensor;
Escort TT-BLE – temperature sensor;
Escort TL-BLE – sensor of temperature, ambient light level;
Escort DU-BLE – angle sensor;
Escort TH-BLE – sensor of temperature, humidity, ambient light level, pressure.
