Vega MT-5 CAN/ User Manual
15
Revision № 04 of 01 July 2022
You can also connect several sensors in turn, while the add window is open, in this case, after clicking
the "OK" button, the sensors will be put into free fields in the order in which they were connected.
After connecting all temperature sensors, you must click the “Save” button to put information about
sensors into device memory.
AUTHORIZED DALLAS KEYS
Vega MT-5 CAN GNSS tracker allows you to connect an I-Button authorized key reader to a 1-Wire
pin. The connection scheme is shown in the figure below. The number of authorized keys can reach ten. To
add a key, you need to connect to the device through the "Configurator" program and go to the “Settings”
menu -> "Security" tab.
In the "Security" tab, expand the "Authorized Dallas keys" settings item and click the "Add Dallas keys"
button. A dialog box will appear.
Attach the key to the reader as during authorization - the device will remember the key number - and
click "OK". The key number appears in the free field. If several keys are added at the same time, it is allowed
to attach them to the reader in turn, while the add window is open, and only then click “OK” - the numbers of
all keys will be added to the free fields in the order in which they were applied to the reader.
Click the “Save” button to put information about keys into device memory.
