Vega M200, M210, M300, M310 / User Manual
17
Revision № 03 of 05.08.2022
K
The device code changed (by default is stated in the device label)
SMS-command: PIN*K#X*
Latin letters and digits are allowed (from 1 to 32 symbols)
Example. The device code setting: kod321:
1234*K#kod321*
S
The radio tag search duration (0 – by default)
SMS-command:
PIN*S#X* where Х = 0…1
0 – 5 seconds
1 – 10 seconds
Example. Set the radio tag search time is 10 seconds:
1234*S#1*
The following settings are designated only by the experienced users
IP
Setting of the IP-address and server port, where the data from the device are sent
SMS-command: PIN*IP#xxx.xxx.xxx.xxx:yyyyy*
Example: Set IP 123.123.123.123 and port 55555
1234*ip#123.123.123.123:55555*
T
Motion sensor sensitivity per amplitude
SMS-command: PIN*T#xx* where x=0…40
Example. Sensitivity per effect amplitude 15: 1234*T#15*
T– in Latin
С
Double control of the sensor motion (by default 0)
SMS-command: PIN*C#x* where x=0…1
Checking algorithm of false triggering:
0 – OFF
1 – ON
Example. Double control of the motion sensor OFF: 1234*C#0*
С – in Latin
