INSTRUCTION MANUAL
MODEL: VEF TA-204IP
INSTRUCTIONS
Thank you for your purchasing our newest telephone with Caller ID phone with IP function. This manual is designed
to familiarize with your phone. To get the maximum use from this product, we suggest that you read this Instruction
Manual before operating it.
FEATURES
FSK/DTMF dual system Auto switch, FSK message auto-adjusts the time of the unit.
30 groups of outgoing messages.
60 groups of incoming messages
4 steps of LCD brightness adjustments.
LCD displays incoming number, date, time, and total incoming calls
Outgoing dialed number and conversation time review and redial back.
Local area code setting
Fast checking the incoming call by calling number and calling date & time
On-hook pre-dial and edit dialing number
PARTS CHECKING LIST
User’s Manual Base Handset Straight Line Cord Coiled Cord
LCD DESCRIPTION
New: is illuminated when the call comes first time (new call). After the new call is reviewed, it will disappear.
REP.: is illuminated when the call comes in over one time, the time showed on the LCD is the last calling time.
OUT: is illuminated when the out going call is checked.
NOTE: Do not expose LCD in the sun for long time.
INSTALLATION
This phone requires 3 AA-sized 1.5V batteries. Open the battery compartment cover and insert the batteries in the
right polarity, then close the cover. When you find the LCD display becomes very dark and some function is not
correct, please change the batteries.
Plug line cord into jack at the rear of the telephone base, connect the other end of the line cord to the telephone line.
Plug coiled cord into handset modular jack. Plug the other end into the jack at the left side of the telephone.
Caller ID function is available only after you apply this service to the local telecom bureau.
SYSTEM SET UP
ADJUST
TIME
Hold UP key for 3 seconds and the digit of year will flash, press UP or DOWN key to edit the digit and press Set key
to move the cursor, repeat the same operation to set month, date and so on. Lift the handset or press H-F Key to exit
setting status.
When receiving a call under FSK format, Time and Date will be updated automatically.
ADJUST THE LCD BRIGHTNESS
Hold DOWN key for 3 seconds and LCD displays the current brightness (there are 4 grades in all), press UP or DOWN
key to adjust brightness to your best fit and lift the handset or press H-F key to exit setting status.
SET THE LOCAL AREA CODE
Hold Dial key for 3 seconds and LCD displays the original area code, then input the local area code (example: KL is
“03”) with Del key to correct, Set key to confirm. Lift the handset or press Speaker key to exit setting status.
Once you’ve set this function, the incoming calls will not include local area code, which is convenient to call back.
DIRECT OR EXT. MODE SETTING
Hold Out key for 3 seconds and LCD displays “0”, input 1 to set as Ext. mode and input 0 to set as direct mode,
namely direct connected with PSTN, finally, press Set key to confirm and exit.
If you’ve set as Ext. mode, you can press Set key after inputting 1 to set the first CO. key number such as 9, press Set
key again to set the second and press Set key once more to exit.
RINGER VOLUME ADJUSTMENT
Slide the ringer switch to HI/LOW to adjust the ringer volume according to personal preference.
P/T MODE ADJUSTMENT
Slide the switch to P/T position to select PULSE or TONE dialing mode
