7.3.3 AP Scan Graph Results
2.4 GHz AP Graph
The AP Scan graph representation indicates the channel width of the AP (20 MHz, 40 MHz, or more) and provides a view of co-
channel APs (APs on the same channel) and adjacent APs (APs on overlapping channel).
The x-axis displays the channel number; the y-axis displays the signal level (in dBm).
For each selected SSID, additional information is displayed at the top of the graph.
A dotted line indicates the Signal Level threshold as configured in the Setup menu (refer to
7.4 Signal Level View
From the AP Scan Table, select an SSID from the list and select the
Track Level
function key, to start tracking the
Signal/Noise level and SNR for the SSID selected
The Track Level function runs a site survey by updating the measurements every second for the SSID under test
The Results can be viewed in Graph or Table format
The Signal/Noise level and SNR for the SSID under test are recorded for 15 minutes
If Location Label is enabled in the Setup menu (refer to
), one of the pre-populated or custom location labels
will be added to the Signal level recording
7.4.1 Signal Level Tracking with Location Label
Location Label Selection
WiFiAirExpertSeries_eManual_D07-00-120P_Rev A00
