VeEX WiFi Air Expert Series Скачать руководство пользователя страница 25

Страница: 25 / 99

For each test category, one of the following icons is displayed. If no icon is displayed, the test was disabled in the setup menu:

Pass

: The test passes without warning or failure.

Warning

: At least one warning condition has been detected for the test.

Tap on the icon to go to the corresponding results tab.

Fail

: At least one failure condition has been detected for the test.

Tap on the icon to go to the corresponding results tab.

: Indicates the results of the Auto-channel selection test (see

Auto Channel Selection

Go back to top

Go back to TOC

6.2.2 Auto-Test Results Navigation

For each test category, one of the following icons is displayed. If no icon is displayed, the test was disabled in the setup menu:

Use the + icon to expand the results and get additional details.

Use the – icon to close the detailed results.

Use the Up and Down arrow keys to scroll through the available results pages. The

quick

side buttons

on the WX150 also controls page scrolling.

Go back to top

Go back to TOC

6.2.3 Security Check Auto-Test

The following tests are performed during the Auto-Test Security Check:

Security Auto-Test Results

WiFiAirExpertSeries_eManual_D07-00-120P_Rev A00

Содержание WiFi Air Expert Series




































































































Результаты поиска

Содержание WiFi Air Expert Series

Отзывы:

Похожие инструкции для WiFi Air Expert Series

Бренды по названию

Популярные бренды

VeEX WiFi Air Expert Series, Руководство пользователя

Результаты поиска

Содержание WiFi Air Expert Series

Отзывы:

Похожие инструкции для WiFi Air Expert Series

Бренды по названию

Популярные бренды