No part of this document may be reproduced or transmitted electronically or otherwise without written permission from VeEX Inc.
This device uses software either developed by VeEX Inc or licensed by VeEX Inc from third parties. The software is confidential
and proprietary of VeEX Inc. The software is protected by copyright and contains trade secrets of VeEX Inc or VeEX's licensors.
The purchaser of this device agrees that it has received a license solely to use the software as embedded in the device, and the
purchaser is prohibited from copying, reverse engineering, decompiling, or disassembling the software.
This user manual is suitable for novice, intermediate, and experienced users and is intended to help you successfully use the
features and capabilities of the VePAL BX100A and BX100V analyzers. It is assumed that you have basic computer experience
and skills, and are familiar with DSL and telecommunication concepts, terminology, and safety.
For more technical resources, visit VeEX Inc web site at
If you need assistance or have questions related to the use of this product, call or e-mail our customer care department for
customer support. Before contacting our customer care department, you must have your product serial number ready. Please go to
section for details on locating your unit serial number in the menus or locate the serial number on the back of the
chassis. Please provide this number when contacting VeEX customer service.
Customer Care:
Phone: + 1 408 970 9090
E-mail:
Website:
3.0 Safety Information
Safety precautions should be observed during all phases of operation of this instrument. The instrument has been designed to
ensure safe operation however please observe all safety markings and instructions. Do not operate the instrument in the presence
of flammable gases or fumes or any other combustible environment. VeEX Inc. assumes no liability for the customer's failure to
comply with safety precautions and requirements.
4.0 Basic Operation
4.1 Keypad
The unit is powered on and off from the red key on the keypad area. In order to turn off the unit, press the Power key for at least 2
seconds. If the unit is not responding, holding the Power key down by more than 10 seconds will force the unit to power down.
The keypad includes the following keys:
BX100A/V e-Manual D07-00-001 Rev E01
Page 6 of 52
