VeEX RXT-6400 Скачать руководство пользователя страница 40

Страница: 40 / 119

To add additional test frames, tap the

Add Frame

button.

Enter the frame size using the numeric keypad and click apply.

Press the back button to return to the frames screen.

The new custom frame size is displayed (it can be enabled or disabled as needed).

RFC 2544 Setup - Frame Settings

Go back to top

Go back to TOC

5.4.1.3 Threshold Settings

Threshold tab:

User enables or disables threshold settings for the throughput and latency tests.

When enabled, threshold settings can be configured for all of the test frames selected in the frame settings tab.

A Pass/Fail criteria will be applied when the threshold settings are enabled. Select a

rate type

from the drop-down menu that

will be used to determine pass/fail criteria. Options are % of Max Rate, % of Line Rate, Utlized Line Rate (Mbps).

For example, if the throughput threshold value for a 64 byte frame is configured for 80%, then a Pass criteria is

assigned if the throughput rate is 80% or better.

The threshold values for Throughput and Latency can be customized per user requirements. Tap on the selected

value to edit.

RFC 2544 Setup - Threshold Settings

Local Setup

RXT-6400_Module_Manual

Page 40 of 119

Содержание RXT-6400
























































































































Результаты поиска

Содержание RXT-6400

Отзывы:

VeEX RXT-6400, Руководство пользователя, Страница: 40 / 119

Результаты поиска

Содержание RXT-6400

Отзывы: