manualshive.com logo in svg

VeEX RXT-6400, Руководство пользователя, Страница: 109 / 119

Поделиться
Скачать
VeEX RXT-6400 Скачать руководство пользователя страница 109

Go back to top

 

Go back to TOC

9.2 Advanced Optical Transceiver Test

To access the advanced optical transceiver test select 

OSFP

 or 

QSFP-DD

 port buttons, select 

Other Functions

, then 

Advanced

Optical Transceiver Testing

.

Setup:

 The left side of the screen contains all the configuration items. Tap on the different buttons to have access to general Setup,

Voltage swing, Pre-FEC BERT, Frequency Offset, Pre-emphasys settings and I2C registers read/write access.

Use the check boxes to enable or disable the different sub tests.

Results:

 The right side of the screen shows the different results. The status indicators on top (Pre-BER, Frequency Offset,

Temperature, TX Optical Power, RX Optical Power, Supply Voltage) not only show the current results, but provide access to the

detailed results if you tap on them.

Advanced Optical Transceiver Setup

Module Tab:

 Tab on the 

module 

tab to view module information.

RXT-6400_Module_Manual

Page 109 of 119

Содержание RXT-6400
























































































































Отзывы:

Нет отзывов