VeEX RXT-1200, Руководство пользователя

Страница: 61 / 117

7.2 Net Wiz
Net Wiz verifies the status of each IP address in the user selected range, by using ARP (Address Resolution Protocol) and ICMP
test.
7.2.1 Net Wiz Setup
Profile: Drop-down selections are Default, Delete, Save, Save As...
Begin IP: Set the start address for the desired IP range using the numeric keypad
End IP: Set the end address for the desired IP range using the numeric keypad
Select the test by placing a check mark in the corresponding box of any of the following: ARP, Ping
Net Wiz Setup
7.2.2 Net Wiz Results
Summary indicates the test status and reports:
TX / RX Frames: Total number of TX (transmitted) and RX (received) frames
RX Errors: Received frames in error
Speed Advert: Speed advertised
Duplex Advert: Duplex mode advertised
Total number of Devices and Networks found
Net Wiz Results Summary
The Devices tab reports global and detailed device information.
RXT1200_Platform_Manual_RevB01 Page 61 of 117