VeEX CX380C Скачать руководство пользователя страница 78

Страница: 78 / 105

10.0 Tools

10.1 IP Tools

The 10/100BaseT management port is located on the right hand side of the unit. This port can be used to connect to the unit for

management purposes (e.g., results retrieval, software upgrade, remote connectivity, etc).

You can access the management port configuration on the

Tools

IP Tools

menu.

Go back to top

Go back to TOC

10.1.1 Setup

By default the IP configuration is set to DHCP and the unit will automatically attempt to connect.

For IP configuration, the following fields are required. Additional fields vary depending on Static or DHCP connection.

Port:

Select

Management Port

from the drop-down menu

Profile:

Default, Delete, Save, Save as..., Default, or Last configuration

IP Address:

Select from Static or DHCP

Static:

If Static is selected, manually enter the IP address parameters (local IP, Gateway IP and DNS server IP)

DHCP:

If DHCP is selected, the unit will obtain IP address parameters from the DHCP server

Enter all parameters then press

Connect

to start the test.

DHCP Setup

For

Static

type connection, these additional fields are required:

Static:

Enter a Local IP, Gateway address (if Gateway and DNS are set to Enable), and Subnet. All Static fields can be filled by

tapping on the section to access an alphanumeric keypad.

Port:

Select

Management Port

from the drop-down menu

Profile:

Default, Delete, Save, Save as..., Default, or Last configuration

IP Address:

Static or IPv4 address of the test set.

Subnet:

Enter the subnet mask.

Gateway and DNS:

Enable or Disable. If set to enable, Gateway and DNS fields become available.

CX380C User Manual RevA00

Page 78 of 105

Содержание CX380C










































































































Результаты поиска

Содержание CX380C

Отзывы:

Похожие инструкции для CX380C

Бренды по названию

Популярные бренды

VeEX CX380C, Руководство пользователя

Результаты поиска

Содержание CX380C

Отзывы:

Похожие инструкции для CX380C

Бренды по названию

Популярные бренды