background image

 

Warnings and Important Notes

Introduction

2

Warnings and Important Notes

Damage Claims

1.

Thoroughly examine all components and units as soon as received. If damaged, 
write a complete and detailed description of the damage on the face of the freight 
bill. The carrier's agent must verify the inspection and sign the description.

2.

Immediately notify the delivering carrier of damage or loss. This notification may 
be given either in person or by telephone. Written confirmation must be mailed 
within 48 hours. Railroads and motor carriers are reluctant to make adjustments 
for damaged merchandise unless inspected and reported promptly.

3.

Risk of loss, or damage to merchandise remains with the buyer. It is the buyer's 
responsibility to file a claim with the carrier involved.

4.

Immediately advise your Veeder-Root representative, distributor, or the factory so 
that we may assist you.

WARNING

This product is to be installed in systems operating near locations 
where highly combustible fuels or vapors may be present. 

Fire or explosion resulting in serious injury or death could result if the 
equipment is improperly installed or modified. Serious contamination 
of the environment may also occur.

1. Read and follow all instructions in this manual, including all 

safety warnings.

2. Comply with all applicable codes including: the National 

Electrical Code; federal, state, and local codes; and other 
applicable safety codes. 

3. Do not alter or modify any component or substitute components 

in this kit. 

4. Do not use this component for other systems aside from the 

WPLLD. Install console only as described in this manual.

5. The WPLLD must be installed and operated in an indoor location.

Содержание WPLLD













Отзывы: