Replacing The CPU Board
Before Turning Off Power
8
Figure 10. Locating SD card
14.Press the outer edge of the SD card towards the read of its enclosure and it should spring out so it can be
removed. Remove the SD card from the old CPU board and check that the read/write-protect switch on the
side of the card is in the position shown in (item 1 Figure 11). Insert the SD card into its enclosure on the new
CPU board with the contact side facing the CPU board (item 2) and gently push the card into its enclosure
until it clicks into the enclosure’s latch.
Figure 11. Installing SD Card
15.If a SATA drive board is installed instead of an SD card, it will be located in the middle of the CPU board
Figure 12. SATA Drive Board
2
1
1
2
Note: SATA drive may
appear slightly
different than version
shown.
