Veeder-Root HydrX, Руководство по установке

Страница: 7 / 39

Introduction Overview
3
Fuel Conditioning Controller (FCC)
The HydrX system is controlled by the FCC which is mounted on a wall in the back office (see Figure 4). The FCC
monitors the Fuel Conditioner in the sump. The FCC turns the pump on via the pump request wire from the FCC
to the Pump Relay box. The 450PLUS shares the Probe and Pressure Sensor and Pump Control info with the
FCC.
Figure 4. FCC
Guide Tube/Water Intake Device (WID)
The WID Riser has a special flange which supports the Guide Tube and which allows the Guide Tube to be
oriented towards the pooled water at the low end of the tank. Once the Guide Tube is bolted in the desired
direction, the WID is lowered down through the Guide Tube until the vacuum tip end of the WID reaches the
center of the pooled water in the tank. The lengths of both the Guide Tube and the WID are custom made to
measurements recorded in the HydrX Site Inspection Guide.
Figure 5. Guide Tube/Water Intake Device