Veeder-Root HydrX, Руководство по установке

Страница: 25 / 39

Installation Fuel Conditioner (FC) Installation
21
FCC Installation
Control of the HydrX system is maintained by the FCC which is mounted in the back office (see Figure 21).
Figure 21. FCC Dimensions
The FCC is to be mounted to the wall in a dry, non-hazardous location such as the back office of the station. Get
the FCC mounting bracket hardware from the kit. Attach the four brackets from the kit to the four corners of the
unit with the supplied screws (see Figure 22). Mark the holes on the wall and mount the unit using customer
supplied screws/anchors sufficient to support its approximate weight of 5 pounds.
Once the FCC is mounted, open the door and peel off the two pieces of shipping tape. Pull tape at a 45º angle to
remove (see Figure 23).
Figure 22. FCC Mounting Clip Figure 23. Remove Shipping Tape