12
Insite360 Connect Configuration
After physically setting up the Insite360 Connect and powering it up, the device will boot and if the device has
already been commissioned for your site (indicated by the presence of a GVR/FMS Site ID number on the
Insite360 Connect’s label [see Figure 7]), it will automatically connect to the GVR Cloud to register and configure
itself within several minutes. Refer to Table 2 (Insite360 Connect LED Status Lights) in the Troubleshooting guide
on the following page to confirm device activation. If the activation does not complete automatically as indicated
by the status LEDs, please contact Insite360 FuelQuest Fuel Management Services at 800-997-7725.
If the GVR/FMS Site ID number on the Insite360 Connect’s label is blank (indicating the device has not already
been commissioned for your site [See Figure 7]), please contact Insite360 FuelQuest Fuel Management Services
at 800-997-7725.
Figure 7. Locating Insite360 Connect’s GVR/FMS Site ID Number
Ethernet
Power
USB 2
USB 1
USB 4
USB 3
MODEL P/N:
33
0020-8
33
DEVICE
S
/N:
MAC Addre
ss
:
GVR/FM
S
S
ite ID:
Contain
s
FCC ID: 2ABCB-RPI
3
2
To avoid overheating and equipment
damage, DO NOT charge electronic
devices with the unused USB ports.
NOTICE
