Console Installation
Wiring the Console
13
DC INPUT POWER
1.
Check the Input Power Rating on the label affixed to the underside of the console to verify whether input
power requirements are +24Vdc and +5Vdc
.
1.
Pull three wires between the DC power source and the console; three #14 AWG or larger color-coded wires
for +24 Vdc, +5Vdc and Ground; and one 4 sq. mm wire, rated for at least 90°C, for barrier ground.
2.
Connect the DC power wires as shown in Figure 6.
Figure 6. Wiring DC Power to the Console
LEGEND FOR NUMBERED BOXES IN Figure 6
1.
Attach barrier wire to grounding clamp
2.
Power connector conduit entry
3.
Equipotential bonding conductor (4 sq. mm min.)
4.
Earth ground
5.
GND (green)
6.
+5 Vdc (black)
7.
+24 Vdc (white)
8.
To DC power source
9.
Battery Isolator - Remove and discard prior to startup.
+24 and +5 Vdc
1
2
3
4
5
6
7
8
+
9
