Console Installation
Wiring the Console
12
AC INPUT POWER
1.
Check the Input power rating on the label affixed to the underside of the console to verify whether input power
requirements are 120 Vac or 240 Vac
.
2.
Pull four wires between the power panel and the console; three #14 AWG or larger color-coded wires for AC
line (hot), AC neutral and chassis ground; and one 4 sq. mm wire, rated for at least 90°C, for barrier ground.
3.
Connect the input 120 or 240 Vac power wires as shown in Figure 5.
Figure 5. Wiring AC Power to the Console
LEGEND FOR NUMBERED BOXES IN Figure 5
1.
Attach barrier wire to grounding clamp
2.
Power connector conduit entry
3.
Equipotential bonding conductor (4 sq. mm min.)
4.
Earth ground
5.
GND (green)
6.
L1 (Red)
7.
N/L2 (black)
8.
(To 240 Vac breaker in power panel)
9.
L1 (black)
10. N/L2 (white)
11. (To 120 Vac breaker in power panel)
12. Battery Isolator - Remove and discard prior to startup.
240 Vac
120 Vac
1
2
3
4
2
3
4
1
5
6
7
8
5
9
10
11
+
+
12
12
