Clear the current account
Set and confirm PLU number.
Print the data from the current measure via label
printer.
Clear the entered price
4. Operation with the scale in weighing mode:
4.1. Turn on and Turn off
– Turning on and turning off is done by the ON/Off switch, which
is on the right at the bottom of the case. First the indication test starts, and then for short the display
shows the model and the software version. Then the scale is ready to work and the display:
4.2. Turn on and Turn off of the backlight
- Turning on and turning off of the backlight is
done by Back Light On/Off switch, which is on the left at the bottom side of the case.
4.3. Zero setting
– If there is some minimal reading on the display, it can be zeroed by
pressing the
key.
4.4. Work with tare
- After placing the package (tare) on the pan, press
key. Readings
on the display is zeroed and the indicator „net weight” lights up. This means that next readings will be
net weight. To remove tare, unload the scale. The display will show the weight of the tare with „-“ and
the indicator „tare“ lights up. By pressing TARE key the scale is zeroed again.
4.5. Weight measuring
– The item to be weighted is placed on the scale pan; the first line of
the display shows the measured weight. The weight data are considered correct, when the indicator for
stable reading lights up.
4.6. Price computing –
The
price is entered from the keypad before or after the load is placed
on the scale. It will be displayed on the second line of the LCD display and the calculated "Price to
pay" will be displayed on the third line. Key "C" on the keypad clears an entered price and then a new
price can to be entered.
4.7. Adding the “Price to pay” from the last measure to the current account
– The “Price
to pay” from the last measure is added to the current account by pressing
. When this operation
is performed the total cost and the number of products in the current account is briefly shown on the
display. Before adding the “Price to pay” of the next product measure, the scale has to be unloaded and
set to zero. By pressing
key, the second line of the display shows TOTAL and the cost and the
number of added to the current account products is shown on the third line. To return to normal
7
