Vectronix USMC VECTOR 21 Скачать руководство пользователя страница 51

Страница: 51 / 64

VECTOR ™- USMC VECTOR 21-V.0.3

Safety notices

Intended purpose

The VECTOR
• is designed as a navigation aid;
• is to be used in addition to

other instruments or techniques;

• must never be used as a sole

navigation instrument.

Limitations of use

The VECTOR must not be used
in the vicinity of sensitive
electrical equipment.
All other usage limitations are
mentioned in the technical
specifications.

Blinding hazard

• Do not look into powerful light

sources with the VECTOR.

• Do not open the VECTOR.

The built-in laser can cause
eye injuries.

Explosion hazard

The battery must not be
• short-circuited;
• recharged;
• mechanically modified;
• placed in fire or heated above

+85

C with the VECTOR.

Inappropriate use

• VECTOR deployment without

prior knowledge of the
operating instructions and
safety notices.

• Changes and modifications to

the VECTOR by the customer.

• Use of third-party accessories

not expressly approved by
Vectronix AG.

Inappropriate use brings the risk
of
• injuries;
• instrument errors;
• damage to property;
• malfunction;

Shop for Vectronix products online at:

1.877.766.5412

www.

SCOUTBASECAMP

.com

Содержание USMC VECTOR 21

































































Результаты поиска

Содержание USMC VECTOR 21

Отзывы:

Vectronix USMC VECTOR 21, Инструкции по эксплуатации и техническому обслуживанию оператора, Страница: 51 / 64

Результаты поиска

Содержание USMC VECTOR 21

Отзывы: