Vectronics VC-300DLP Скачать руководство пользователя страница 2

Страница: 2 / 9

VC-300DLP Antenna Tuner

Owner's Manual

OTHER

Frequency Coverage .............. 1.8 - 30 MHz

Power..................................... 150 watts Continuous; 300 watts pep, SSB

Dimensions............................ 3.5" (89mm) H x 10.2" (266mm) W x 9.4" (240mm) D.

Weight ................................... 3.6 lbs. (1.6 kg.)

CONTROLS / CONNECTORS

FRONT PANEL FUNCTIONS

1. TRANSMITTER

Continuously adjustable input capacitor.

2. POWER / SWR METER

Dual needle meter displays FORWARD and REFLECTED Power in Watts.

The SWR is measured where the two needles intersect on the red scale.

3. ANTENA

Continuously adjustable output capacitor.

4. OUTPUT

SELECT

Eight-position rotary switch selects an output coaxial connector.

DIRECT MODE

DMY LOAD selects the internal Dummy Load, bypassing the impedance matching

circuit but providing normal meter readings.

BYP selects the Bypass Connector on the rear panel, bypassing the impedance

matching circuit but providing normal meter readings.

COAX 1 selects the COAX 1 Connector, bypassing the impedance matching circuit but

providing normal meter readings.

Содержание VC-300DLP









