Vectronic Aerospace VERTEX Lite Collar, Руководство пользователя, Страница: 62 / 87

Remote Collar (Communication) 62
© 2017 VECTRONIC Aerospace GmbH
All options are explained in Chapter User Configuration and Schedules .
NOTE: Please keep in mind that some changes will affect not only the collar but also
your ability to reset them. All changes should be well planned and documented.
Figure 49: Remote VERTEX Collar Configuration
You can check the parameters you want to change and alter the values. The message
can contain a maximum of 25 bytes only. The program indicates when your changes
exceed that threshold. Please send two
messages instead including a part of the changes only. The collar will receive both and
store all changes.
To send out commands you have to do the following steps:
1. Check the Parameters you want to change
2. Change the parameter to new values
3. Check the collar(s), one or more according to left sided list you want to send the
new configuration to
4. Press the send Button
5. Optionally: click on “Store Outbox File” for third party applications.
6. Follow up on collar command reception (in Data Collar Reception
Status )