Vectron Vario II, Руководство пользователя

Страница: 15 / 112

15
EN
NOTICE
• Never set up the power supply and the POS system other than
described in the instructions. You can damage the compo-
nents of the POS system
, if for instance the setup site is not
stable. Prior to setup please read chapter 6.1.1 “Selecting the
setup site for Vario II” on page 44.
• Put the safety plug of the supplied power cord exclusively into
a grounded socket with alternating voltage between 110 and
240 volt, which is protected with a fault current circuit breaker.
You can damage the power supply and the POS system
, if for
instance voltage and current of another power supply network
are too high for the electronics.
• Have the programming, configuration and program functions
protected by passwords.
Operators can change the program-
ming and configuration and execute program functions
deliberately or unintentionally
, so that data is changed or
deleted and e.g. is no longer within the law. Please contact your
Vectron dealer, who will assign the operator rights according to
your requests.
• Never change the programming and configuration if you lack
sufficient knowledge and abilities. You can change them un-
intentionally , so that data is changed or deleted and e.g. is no
longer within the law. Please contact your Vectron dealer, who
will program and configure the POS system according to your
requests.
• Never use caustic cleansers for cleaning power supply and
POS system. You can damage the surface of the POS system
components
, since caustic cleansers cause a chemical reaction
with the surface materials. Prior to cleaning read chapter 10.1
“Cleaning” on page 79.
• Always send the power supply and the POS system in the origi-
nal packaging. The POS system components can be damaged
during transport
, as another packaging may not absorb the
shocks as required. Keep the original packaging.