Vectron POS TOUCH 15 II WIDE, Руководство пользователя

Страница: 46 / 70

46
USER MANUAL
POS TOuch 15 II WIde
Errors Possible reasons Troubleshooting
The was switched off while
the operator key was inserted;
then, the operator key was
removed.POS Touch 15 II Wide Restart with the operator key
plugged in or delete the hold
buffers in the programming.
The
POS Touch 15 II Wide
does not display
anything. The POS Touch 15 II Wide is
switched off. Press the On/Off key
as described in chapter
7.1.1 “Switching on the
POS Touch 15 II Wide” on page
30.
The screen saver is active. Touch the screen with the stylus
or with a finger.
The Vectron POS software is
malfunctioning. Contact your Vectron specialist
retailer.
The power supply is damaged. Contact your Vectron specialist
retailer.
The is
damaged.POS Touch 15 II Wide Contact your Vectron specialist
retailer.
The
POS Touch 15 II Wide
processes other
entries than those
made on the touch
screen. The touch screen is not calib-
rated. Contact your Vectron specialist
retailer.
The Vectron POS software is
malfunctioning. Reboot the POS Touch 15 II Wide
as described in chapter 7.1.3
“POS Touch 15 II Wide Restart”
on page 31.
Programming and configuration
of the POS Touch 15 II Wide are
faulty. Contact your Vectron specialist
retailer.
The touch screen is damaged. Contact your Vectron specialist
retailer.
The sound repro-
duction of the
POS Touch 15 II Wide
does not work. Loudspeakers are connected to
the audio port but the volume
is too low. Adjust the volume.