Vectron Duratec POS S15 II, Заметки о безопасности и установке

Страница: 25 / 52

25
POS S15 II
D
a brand of Vectron
POS S15 II
EN
3.1 .2. Connecting POS S15 II to the power supply
A
CAUTION
Danger of tripping and damaging device caused by device cables lying
unprotected in the room.
Ö
Route the device cables so that they do not pose a potential
hazard!
Ö
Route the cables so that they are not subject to tensile loading.
NOTICE
Damages caused by excessively high voltages or currents.
Ö
Use an earthed socket to which alternating current between 110
and 240 volts is connected.
Ö
Use power sources which are protected with a residual-current
circuit breaker.
f Insert the earthing-pin plug of the mains cable in a socket.
3.1 .3. Connecting devices to the POS S15 II
i
Your Vectron specialist retailer will be glad to inform you on
available peripheral devices.
3.1 .4. Aligning the screen
A
CAUTION
Pinching of fingers when aligning the screen.
The gap between the screen housing and the joint changes during
alignment.
Ö
Do not insert your fingers between the screen housing and the
joint.
f Adjust the display to your field of vision by tilting the housing.