FIG. 2
12
B
11
C
Attached to One Other Series VX Machine:
4d.
Bolt two Standard Base Channels (ATT2) together (3/8-16 X 1/2 hex
bolts and nuts, Qty: 4 each). Bolt them together on a flat surface to ensure
that surfaces align with each other. Ensure that these bolts are very tight.
Now bolt the column to one of the base channels (3/8-16 X 1/2 hex bolts,
Qty: 4 per column). Once the two Series VX columns are in place, use the
two Straight Connecting Bars to connect the upper attachment holes on
the columns together (1/2-13 X 1 button head bolts, Qty: 4). Use large hole
plugs to fill empty holes.
FIG. 1
Attached to Two Other Series VX Machines:
4e.
Bolt the Stack Column (B) to the Triangle Base (ATT3) (3/8-16 X 1/2
hex bolts, Qty: 6 per column). Once the three Series VX columns are in place,
use the three Angled Connecting Bars to connect the upper attachment
holes on each column together (1/2-13 X 1 button head bolts, Qty: 6).
Use large hole plugs to fill empty holes.
FIG. 1
5.
Assemble the Stack Column (B) to the Leg Press Main Frame (C)
(3/8-16 X 1/2 hex bolts, Qty. 6).
FIG. 2
6.
Slide front of seat assembly (D) onto rear of seat strip. Attach bi/tri
column (E) to frame (C) (3/8-16 X 3/4 hex screws, Qty: 2).
IMPORTANT:
Ensure that the two cables that pass between the frame and the column
aren’t twisted around each other. At this point make sure that all frame
bolts are tight.
FIG. 3
7.
Attach both pivot levers (F & G) to frame (C) (1/2-13 X 1 button head
screw, Qty: 4).
FIG. 4
8.
Refer to
FIG. 4
. String cable around pivot lever pulley #4, string cable
around upper pulley #3 in main frame (C), then insert cable into keyhole
on pivot lever cam strip and slide down. Insert plastic hole plug into
keyhole to retain cable. Now attach footplate (H) to both pivot levers
(1/2-13 X 1 button head screw, Qty: 4). Make sure all 8 screws in pivot
levers are very tight.
FIG. 4
Содержание VX-11
Страница 1: ...VX 1 1 Owner s Manual...
