X2-O
PERATIONS
M
ANUAL
B
UTTON
D
ISPLAY
Doc: 70-00-0950A, Serie X2, 20211220
© Vector Controls GmbH, Schweiz
Page 12-16
Subjects to alteration
www.vectorcontrols.com
V
ECTOR
6.
Press the ( /
) button and adjust the
month
the holiday
starts
with the ( ) ( ) button.
➔
2 bars indicate setting step 2 is executed.
7.
Press the ( /
) button and adjust the
day
the holiday
starts
with
the ( ) ( ) button.
➔
3 bars indicate setting step 3 is executed.
8.
Press the ( /
) button and adjust the
month
the holiday
ends
with the ( ) ( ) button.
➔
4 bars indicate setting step 4 is executed.
9.
Press the ( /
) button and adjust the
day
the holiday
ends
with
the ( ) ( ) button.
➔
5 bars indicate setting step 5 is executed.
10.
Press ( /
) to finish the holiday setup.
11.
Now you are back in menu "program selection" (instruction No. 4).
Start creating the next holiday schedules for program 2 to 12 as
required.
To go back to the previous submenu, press the ( ) button (1x).
5.4
Heat
–
Cool
–
Fan only
–
Auto selection
Overview
This section describes how to set the controlling mode of the X2 device.
Depending on the configured application, this submenu can have up to 5 different setting options or is
deactivated entirely.
Procedure
1.
Press the ( /
) button longer than 2 seconds.
➔
SEL
and the actual
Date
and
Time
are displayed alternatingly.
2.
Press the ( ) or ( ) button until the heat/cool submenu
H-C
and
SEL
or
Auto
is displayed.
