TRI2-FU
P
RODUCT
D
ATA
S
HEET
Doc: 70-00-0750C, 20230220
© Vector Controls GmbH, Switzerland
Page 8-10
Subjects to alteration
www.vectorcontrols.com
V
ECTOR
BIBB
Type
Name
DM-UTC-B
Device management
UTC Time synchronisation - B
DM-RD-B
Device management
Reinitialize device - B
Supported standard BACnet application services
- ReadProperty
- ReadPropertyMultiple
- WriteProperty
- ChangeOfValue
- DeviceCommunication (password protected)
- I-Am
- I-Have
- TimeSynchronisation
- UTCTimeSynchronisation
-
ReinitializeDevice (“cold” or “warm”) (password protected
)
Supported standard Object types
- Device
- Analog input
- Analog value
- Binary value
- Multi-state Value
- Network Port
X2 Functional Scope
The controller supports the following X2 functions and elements:
Group
Modules
QTY
Description
UP
-
-
User and display parameters
UI
01U to 03U
3
Sensor inputs for temperature and humidity
04U to 06U
3
Universal inputs for RT/DI, mA, VDC
07U to 10U
4
Virtual inputs for operation terminals, bus modules or special functions
AL
1AL to 8AL
8
Alarm conditions
LP
1L to 2L
2
Control loops
AO
1A to 2A
2
Analog outputs for mA, VDC
FAN
1F
1
Fan or lead lag modules, 1 to 3 fan speeds, up to 3 switching lead-lag stages each
DO
1d to 2d
2
Binary outputs with a normally open (NO) relays contact
FU
1FU
1
Remote Enable: Activation of the controller based on signal and alarm conditions
2FU
1
Change Operation Mode: Switching occupied and unoccupied with control signals
3FU
1
Heat/Cool Change: Switching heating and cooling based on a control signal
4FU
1
Setpoint Compensation: Summer/winter compensation of setpoint
5FU
1
Economizer (free heating or cooling due to the condition of outside and room air)
CO
-
-
Communication (if a communication module is available)
COPY
-
-
Copying complete parameter sets between run, default and external memory with
up to 4 memory locations (AEC-PM2)
RTC
-
1
Real time clock module with 48-hour power back up (keeps clock running during
power failure)
PRO
Pr01 to Pr12
12
Time schedule programs for 7 days or annual switching events
More detailed information on the X2 functions can be found in the "X2 Engineering Manual" on our website
