O
PERATIONS
M
ANUAL
T
IME
P
ROGRAMING FOR
TCY-MZ
Doc: 70-00-0989A, 20220920
© Vector Controls GmbH, Switzerland
Page 3-6
Subjects to alteration
www.vectorcontrols.com
V
ECTOR
3
Time Programming
3.1
Clock Operation
Overview
This section gives an overview of the clock and the available timed functions of the device.
Note on Accuracy
Warning: Devices with a "D" addition (e.g. TCY-MZ2-D) have a real-time clock. This clock is accurate to two
seconds a day.
Time Programs
Up to 8 time and weekday programs can be programmed (Pr01 to Pr08). Time schedules can change the setpoint of the
controller.
Devices with a "D" addition (e.g. TCY-MZ-D) have a real-time clock with a maintenance-free power backup.
A flashing clock
time “00:00”
indicates that the time has not been set or that the device has been without power for
more than 48 hours. The time must be set for the schedules to work.
3.2
Clock Setting
3.2.1
Setting time and date of clock
Overview
This section describes how to set the time and date of the system clock.
Procedure
1.
Press the ( /
) button longer than 3 seconds.
➔
SEL
and the actual
Time
is displayed.
2.
Press the ( /
) button briefly to start changing the time and date:
Minutes
flashes: ( ) ( ) button for adjustment, ( /
) button to
save.
Hours
flashes: ( ) ( ) button for adjustment, ( /
) button to
save.
Day of the week
flashes: ( ) ( ) button for adjustment, ( /
)
button to save.
Note: Monday is day 1 of the week.
Set Minutes
Set Hours
Set Day of Week
Press the ( ) button (1x) to go back.
