3
AC and DC recharge adapters are supplied with the spotlight. The unitt can be
recharged from any 120 volt 60 Hz AC receptacle and from a 12 volt DC accessory
outlet. This permits recharge flexibility for use around home, business or in the field.
12 volt DC power is available from most vehicles, boats, jump starters and portable
battery packs. Vector has a variety of portable power products that would make ideal
companions.
NOTE:
This unit is shipped in a partially charged state. Initially charge unit using the
AC charger for 12-24 hours until charging indicator LED on top of unit-
flashes.
2. OPERATION
2.1 Using the locking trigger switch:
• The trigger switch is located on the front of the pistol-grip handle of the spot-
light (see Figure 1).
• Turn on the spotlight by squeezing the trigger switch.
• Turn off the spotlight by releasing the trigger switch.
• To lock the trigger switch into the on position for continuous operation, squeeze
the trigger switch and firmly press the trigger locking button located on the side
on the handle (see Figure 1). The spotlight will stay on until the lock is released.
FIGURE 1
- Location Diagram.
TRIGGER
ON/OFF
SWITCH
REPLACEABLE
QUARTZ HALOGEN
ULTRA BRIGHT
SPOTLIGHT BULB
HEAVY-DUTY
RUBBER IMPACT
RING GUARD
3 LED AREA LIGHT
RECHARGING
PORT
LOCKING
SPOTLIGHT
ON/OFF
SWITCH
3. CHARGING THE VECTOR SPOTLIGHT DURING EITHER
AC RECHARGE/DC RECHARGE
1. Connect the charger to an appropriate power source (see DC or AC source).
2. Plug the charger's barrel connecter into the recharge port (see Figure 1).
3. Recharge with AC adapter for 24 hours maximum or 4-6 hours with DC adapter.
Charging indicator LED (located on the top of the unit) flashes when battery is
fully charged.
4. After recharge, disconnect the barrel connector from the recharge port and
store the adapter.
5.
Disconnect charger and wait 5 minutes before use.
