background image

2

NOTE:

This unit is shipped in a partially charged state, charge for 24 hours using

AC method.

SAFETY INFORMATION

WARNING:

(Warning statements identify conditions or practices that may result in personal

injury or loss of life)

1) When working with lead acid batteries, always make sure immediate assistance

is available in case of accident or emergency.

2) Always use protective eyewear when using this product: contact with battery acid

may cause blindness and/or severe burns, be aware of first aid procedures in

case of accidental contact with battery acid.

3) There is a risk of explosive gases being released when lead acid batteries are

being charged or discharged. Failure to follow instructions may cause property

damage, explosive hazard, and/or personal injury.

4) When connecting the battery clamps to a discharged battery, and an alarm sounds

- the polarity is reversed.

5) When charging unit from a 120 Volt ac electrical outlet in any wet or damp

area, make sure that the outlet used is protected by a ground fault interrupt (GFCI)

outlet.

6) When charging the unit near water, do not allow the electrical cords and outlets

to get wet or come near water–electrical shock could result.

7) Jump-start procedures should only be performed in a safe, dry, well-ventilated

area.

8) Always store battery clamps in built-in holsters when not in use. Never touch

battery clamps together, this can cause dangerous sparks, power arcing

and/or explosion.

9) When using this unit in proximity to the vehicle’s battery and engine, stand the

unit on a flat, stable surface, and be sure to keep all clamps, cords, clothing and

body parts away from moving vehicle components.

10) Do not wear vinyl clothing when jump-starting a vehicle, friction can cause

dangerous static-electricity sparks. Remove all jewelry or metal objects that could

cause short circuits or react with battery acid.

11) Always disconnect the negative (Black) jumper cable first: followed by the

positive (Red) jumper cable, except for positive ground systems.

12) Never allow  red and black clamps to touch each other or another common metal

conductor–this could cause damage to the unit and/or create sparking/

explosion hazard. Always store battery clamps in built-in holsters when not in use.

13) Do not expose battery to fire or intense heat as it may explode. Before disposing

of the battery, protect exposed terminals with heavy-duty electrical tape to

prevent shorting (shorting can result in injury or fire).

14) Do not smoke or use inflammable items (matches, cigarette lighters, etc.) while

working on a vehicle’s battery system.

15) Keep unit out of reach of children (whether stored, or in use)!

FIRST AID:

SKIN: If battery acid comes in contact with skin, rinse immediately with water, then

wash thoroughly with soap and water. If redness, pain, or irritation occurs, seek

immediate medical attention.

EYES: If battery acid comes in contact with eyes, flush eyes immediately, for a

minimumof 15 minutes and seek immediate medical attention.

Содержание Power on Board VEC021STC

















Отзывы: