VECTORTRAP
TM
ADVANCED MOSQUITO TRAP
Mosquitoes can be a real nuisance and their bites can cause irritation of the skin
including itching, redness and swelling. Mosquitoes are also vector carriers for
many diseases affecting humans and livestock. These include dengue, Yellow
Fever and Malaria.
Effective up 150m
2
, the Vectortrap
tm
T10&15 can help control the population of
mosquitoes and other small flying insects such as fruit flies and midges in food
restaurants, shops, public facilities, patio areas, greenhouses, stables and gar-
dens.
HOW DOES IT WORK?
SPECIFICATIONS
FEATURES
1. Designed for indoor and Outdoor use
2. Ultra Violet and CO2 Lure
3. Low Noise
4. Easy to set up
The vectortrap
tm
T10&15 trap works by luring the flying insects to the trap via UV
light &CO2 gas which replicates human or animal breath. Once the insects are in
catching distance, an electric fan sucks the insects into a mesh net.
This UV system is also Less noisy and cleaner than conventional Ultraviolet zap-
pers. Our trap is ideal for bars& restaurants, patio areas and greenhouses.
Model
T10
T15
Size
Ø24x32cm
Ø24x32cm
BL lamps
4Wx2(Quartz)
4Wx2(Quartz)
Electricity
220V, 60HZ
220V, 60HZ
Effective Area
99m²~150m²
99m²~150m²
Consumption
22W
22W
Material
ABC
ABC
CAUTION
1. Keep out of reach of children
2. Disconnect power before cleaning or servicing the trap.
3. Do not hang trap from the power cord.
4. Do not immerse the trap in water.
5. Do not operate the trap with a damaged power cord or plug.
6. Plug the trap correct voltage supply
7. Read and follow the instructions in this manual before operating the Trap.
WHERE TO PLACE THE TRAP
1. The Vectortrap T10&15 can be
used for indoor or outdoor.
2. Place the trap in a shaded area
protected from strong wind.
3. Using the wall hook and chain
provided hang the Vectortrap 1.5
~ 2m from the ground.
FITTING INSTRUCTIONS
1.Remove the trap from the carton box.
2. Once in place, unscrew the bottom housing (mesh cage and place the glue board
on the bottom.
3. Following the instructions for adding the CO2 on the back of this manual, fix the
bottle to the bottom housing as shown.
4. once the glue board and CO2 canister are fixed to the bottom housing, screw the
bottom housing back in place.
5. Plug the trap to the mains.