CHECKLIST BEFORE STARTING THE UNIT
3
Unpacking the Unit
Manual
When unpacking the unit, please make
sure that the machine is not damaged
and that all accessories mentioned in
this manual are not missing.
Fill the Fuel Tank
Unscrew the tank counter-clockwise
from the main body. Fill the tank with
the dilutant of your choice. Water for
water based fogging or oil for oil based
fogging. Do not add more dilutant than
needed. Do not overfill the tank. When
finished with filling the tank, screw the
tank tightly back to the main body in a
clockwise direction.
Dilutant
Tank
Fill the Chemical Tank
(quimicos)
Pre-mix chemical with an oil or water
based emulsifier prior to filling the
chemical tank. Please refer to chemical
manufacturers instructions for correct
ratio. Fill the special chemical mixture
into the chemical tank. It is important
not to add more chemical mixture than
is needed. Please check level on the
window located on the side of the
machine. Maximum level is 350ml.
When you finish filling the tank, close
the tank cap tightly.
Note: Leaving remaining chemicals in
the tank after use could affect the
performance of the machine in the
following session as deposits may
solidify.
Chemical Level
Indicator
Chemical
Tank
Plastic
Pump
BY100 Mini Fogger
Shoulder
Strap
