Vecow SPC-4000, Руководство пользователя

Страница: 29 / 103

22 ©Vecow SPC-4000 User Manual GETTING TO KNOW YOUR SPC-4000
2.2.2.9 10/100/1000 Mbps Ethernet Port
There are 2 8-pin RJ-45 jacks supporting 10/100/1000 Mbps Ethernet
connections in the front side of SPC-4020/SPC-4020A. LAN 1 (Left side) and
LAN 2 (Right side) are powered by Intel
®
I210 Ethernet engine with IEEE 1588,
The Precision Time Protocol (PTP) function. When both LAN 1 and LAN 2 work
in normal status, basic iAMT function is enabled.
Using suitable RJ-45 cable, you can connect SPC-4020/SPC-4020A system to a
computer, or to any other devices with Ethernet connection, for example, a hub
or a switch. Moreover, both of LAN 1 and LAN 2 support Wake on LAN and Pre-
boot functions. The pinouts of LAN 1 and LAN 2 are listed as follows :
Pin No. 10/100 Mbps 1000Mbps
1 E_TX+ MDI0_P
2 E_TX- MDI0_N
3 E_RX+ MDI1_P
4 ----- MDI2_P
5 ----- MDI2_N
6 E_RX- MDI1_N
7 ----- MDI3_P
8 ----- MDI3_N
VGA HDMI
LAN 1 LAN 2
Isolated
DIO
Each LAN port is supported by standard RJ-45 connector with LED indicators to
present Active/Link/Speed status of the connection.
The LED indicator on the right bottom corner lightens in solid green when the
cable is properly connected to a 100Mbps Ethernet network. The LED indicator
on the right bottom corner lightens in solid orange when the cable is properly
connected to a 1000Mbps Ethernet network. The left LED will keep twinkling/off
when Ethernet data packets are being transmitted/received.
LED Location LED Color 10Mbps 100Mbps 1000Mbps
Right
Green/
Orange
Off
Solid
Green
Solid
Orange
Left Yellow
Twinkling
Yellow
Twinkling
Yellow
Twinkling
Yellow
1 8