7
GETTING TO KNOW YOUR RES-1000
2.3.1 DVI Connector
The DVI connector on the rear panel supports only DVI-D display. This
connector can either output DVI signal. The DVI output mode supports up to
1920 x 1200 resolution and output mode supports up to 1920 x 1200 resolution.
The DVI is automatically selected according to the display device connected.
You will need a DVI-D cable when connecting to a display device.
DVI
LAN 1
LAN 2
USB 2.0
COM 2
COM 3
DC-IN
Pin No.
LAN1
LAN2
1
LAN0_MDI_1P
LAN1_MDI_1P
2
LAN0_MDI_1P
LAN1_MDI_1P
3
LAN0_MDI_2N
LAN1_MDI_2N
4
LAN0_MDI_2P
LAN1_MDI_2P
5
LAN0_MDI_4P
LAN1_MDI_4P
6
LAN0_MDI_4N
LAN1_MDI_4N
7
LAN0_MDI_3N
LAN1_MDI_3N
8
LAN0_MDI_3P
LAN1_MDI_3P
2.3.2 10/ 100/ 1000 Mbps Ethernet Port
DVI
LAN 1
LAN 2
USB 2.0
COM 2
COM 3
DC-IN
There are 2 M12 jacks supporting 10/ 100/1000 Mbps
Ethernet connections in the rear side. LAN 1 is powered by
Intel I219 Ethernet engine; LAN 2 is powered by Intel i210
Ethernet Phy. When both LAN 1 and LAN 2 work in normal
status, iAMT 11.0 function is enabled. Using suitable M12
LAN cable, you can connect the system to a computer, or
to any other devices with Ethernet connection, for example, a hub or a switch.
Moreover, both of LAN 1 and LAN 2 supports Wake on LAN and Pre-boot
functions. The pin-outs of LAN 1 and LAN 2 are listed as follows:
