31
GETTING TO KNOW YOUR RCS-7000
The RCS-7000 series offers 6 to 36 VDC power input with the terminal block. If
the power is supplied properly, the Power LED will light up a solid green.
80V power surge protection is design in in LTC4356.Grounding and write
routing help limit the effects of noise due to EMI. Run the ground connection
from the ground screw to the grounding surface prior to connecting the power.
See the figure shown below for the location of the earth ground on the terminal
block power connector. Connect the earth ground wire to an appropriate
grounded metal surface.
2.2.15 Remote Power On/ Off Switch
It is a 3-pin power-on or power-off switch through Phoenix Contact terminal
block. You could turn on or off the system power by using this contact. This
terminal block support dual function of soft power-on / power-off (instant off or
delay 4 second), and suspend mode.
DC 6 - 36V
V+
V-
Isolated
DIO 2
Reset
COM 1
COM 2
| LAN 2
VGA
DVI-D
V+
1
2
| LAN 1
V-
COM 4
COM 3
Isolated
DIO 1
On | Off