Vecow EVS-2000 LIQ, Руководство пользователя

Страница: 52 / 128

45 GETTING TO KNOW YOUR EVS-2000 LIQ
2.6.2 Ignition Control Wiring
To activate ignition control, you need to provide IGN signal via the 3-pin pluggable
terminal block locates in the back panel. Please find below the general wiring
configuration.
For testing purpose, you can refer to the picture blow to simulate ignition signal
input controlled by a latching switch.
Note :
1. DC power source and IGN share the same ground.
2. EVS-2000 supports 9V to 50V wide range DC power input in ATX/AT mode.
In Ignition mode, the input voltage such as the wide voltage operating range
of the system is 9V to 50V DC.
3. For proper ignition control, the power button setting should be "Power Down"
mode.
In Windows for
example, you need
to set "When I press
the power button" to
Shut down.
Pin No. Definition
1 Ignition (IGN)
2 SW+
3 SW-
IGN
V+