25
GETTING TO KNOW YOUR EMBC-1000
2.2.11 CN13 : LAN
2
1
2
10
1
9
CN13
Pin No.
10/ 100Mbps
1000Mbps
1
E_TX+
MDI0_P
2
E_TX-
MDI0_N
3
E_RX+
MDI1_P
4
----
MDI2_P
5
-----
MDI2_N
6
E_RX-
MDI1_N
7
-----
MDI3_P
8
------
MDI3_N
There are two 8-pin RJ-45 jacks supporting 10/ 100/1000 Mbps Ethernet
connections in the front side of MTC-4015. LAN 1 is powered by Intel
®
218LM
Ethernet engine; LAN 2 is powered by Intel I210 Ethernet engine. When both
LAN 1 and LAN 2 work in normal status, basic iAMT function is enabled.
Using suitable RJ-45 cable, you can connect MTC-4015 system to a computer
or to any other devices with Ethernet connection, for example, a hub or a
switch. Moreover, both LAN 1 and LAN 2 supports Wake on LAN and Pre-boot
functions. The pinouts of LAN 1 and LAN 2 are listed as follows:
Содержание EMBC-1000
Страница 46: ...39 INSTALLATION Step 2 Fasten five PH M3x6 screws circled in red...
Страница 48: ...41 INSTALLATION 3 3 Installing DDR4 SO DIMM Module Step 1 Install DDR4 RAM module into SO DIMM slot...
Страница 50: ...43 INSTALLATION Step 2 Fasten one M2 5 screw 3 5 Installing SIM Card Step 1 Open the SIM card cover...