Vecow ECX-1300 GTX1070, Руководство пользователя

Страница: 77 / 146

69 ©Vecow ECX-1400/1300 User Manual GETTING TO KNOW YOUR ECX-1400/1300
2.6.2 Ignition Control Wiring
To activate ignition control, you need to provide IGN signal via the 3-pin
pluggable terminal block locates in the back panel. Please find below the
general wiring configuration.
For testing purpose, you can refer to the picture blow to simulate ignition signal
input controlled by a latching switch.
Note :
1. DC power source and IGN share the same ground.
2. ECX-1400/1300 supports 6V to 36V wide range DC power input in ATX/AT
mode. In Ignition mode, the input voltage is fixed to 12V/24V for car battery
scenario.
3. For proper ignition control, the power button setting should be "Power Down"
mode.
In Windows for
example, you need
to set "When I press
the power button" to
Shut down.
Pin No. Definition
1 Ignition (IGN)
2 SW+
3 SW-
IGN
V+