22
GETTING TO KNOW YOUR ECS-4500
©Vecow ECS-4500 User Manual
Each LAN port is supported by standard RJ-45 connector with LED indicators to
present Active/Link/Speed status of the connection & POE status LED.
The LED indicator on the right bottom corner lightens in solid green when the
cable is properly connected to a 100 Mbps Ethernet network, and it lightens
in solid yellow when the cable is properly connected to a 1000 Mbps Ethernet
network. The left LED will keep twinkling/ off when Ethernet data packets are
being transmitted/ received.
Bottom LED
10Mbps
100Mbps
1000Mbps
Left
Off
Solid Green
Solid Yellow
Right
Flash Yellow
Flash Yellow
Flash Yellow
2.3.5 PoE (Power over Ethernet) Ports
There are 4 RJ45 connectors in the rear side of ECS-4700. It supports IEEE
802.3at (PoE+) Power over Ethernet (PoE) connection delivering up to 25W/54V
per port and 1000BASE-T gigabit data signals over standard Ethernet Cat 5/Cat
6 cable.(Remind : PoE power budget supports up to 25.5W/each, total 35W.)
When using suitable RJ-45 cable, you can connect the system to a computer, or
to any other devices with Ethernet connection; for example, a hub or a switch.
Moreover, all of LAN3, LAN4, LAN5 and LAN6 support Wake on LAN and Pre-
boot functions. The pin-outs of LAN3, LAN4, LAN5 and LAN6 are listed as
follows:
Pin No.
10/ 100 Mbps
1Gbps
PoE
1
E_TX+
MDI0_P
PoE+
2
E_TX-
MDI0_N
PoE+
3
E_RX+
MDI1_P
PoE-
4
----
MDI2_P
----
5
-----
MDI2_N
----
6
E_RX-
MDI1_N
PoE-
7
-----
MDI3_P
----
8
------
MDI3_N
----