57
©Vecow ECX-2600A/2400A/2300A PEG User Manual
GETTING TO KNOW YOUR ECX-2600A/2400A/2300A PEG
2.6.2 Ignition Control Wiring
To activate ignition control, you need to provide IGN signal via the 3-pin
pluggable terminal block locates in the back panel. Please find below the
general wiring configuration.
For testing purpose, you can refer to the picture blow to simulate ignition signal
input controlled by a latching switch.
Note :
1.
DC power source and IGN share the same ground.
2.
ECX-2600A/2400A/2300A PEG supports 9V to 50V wide range DC power
input in ATX/AT mode. In Ignition mode, the input voltage such as the wide
voltage operating range of the system is 9V to 50V DC.
3. For proper ignition control, the power button setting should be "Power Down" mode.
In Windows for example,
you need to set "When I
press the power button" to
Shut down.
Pin No.
Definition
1
Ignition
2
SW+
3
SW-
V+ V
DC-IN
Содержание ECX-2300A PEG
Страница 74: ...66 Vecow ECX 2600A 2400A 2300A PEG User Manual SYSTEM SETUP Step 5 Fasten one PHILLPIS M2 5 screw...
Страница 83: ...75 Vecow ECX 2600A 2400A 2300A PEG User Manual SYSTEM SETUP Step 5 Fasten the module with the screw indicated...
Страница 87: ...79 Vecow ECX 2600A 2400A 2300A PEG User Manual SYSTEM SETUP Step 6 Fasten the module with the screw indicated...
Страница 95: ...87 Vecow ECX 2600A 2400A 2300A PEG User Manual SYSTEM SETUP Step 5 Fasten the nuts indicated...