Vdwall LVP909 Series, Руководство пользователя, Страница: 14 / 35

Output Brightness
1
.
Brightness 32
4. Set output image position and size
Press Setup to enter setup menu, then press ↓ to select 2. Output Image and
press OK to enter. Press mode buttons M1 , M2 , M3 , M4 to select the desired
adjustment display modes. Press ↑ or ↓ to select corresponding setting and rotate
knob to change parameters. Press OK to save.
1. VGA input auto adjustment ( Auto )
When LVP909 is in AppM1 and current input signal is VGA or Image 1 is VGA
input in multi-windows mode, VGA input is effective. Press Auto to adjust VGA
input signal sampling parameters. Then the VGA output image can be clear and full.
Pic 6-5a LCD window: output brightness setting
2. Button Lock ( Lock )
Press Lock, then all buttons of LVP909 will be lock. In addition to Lock button,
all other buttons are invalid to prevent misuse. Press 3 times Lock without stop
to unlock. In the key locked, only LAN, Rs232, USB communication are available
to prevent conflict between remote control and panel buttons. When remote control
give commands, the device will enter buttons lock state auto. The menu will be
as follow.
3. Check system information ( Info )
Press button Info to enter System Info menu. Press ↑ , ↓ to check. Press
to exit. System info menu as follow:
Button lock
Keypad Invalid
LAN valid
Rs232 valid
USB
valid
Pic 6-5b LCD window: button lock
2
.
Output Image ( Out 1 ) AppM5 M3
2.1 Out Width 960
2.2 Out Height 540
2.3 Out H_Start 0
2.4 Out V_Start 540
5. Set output image border
LVP909 can set different color and size boarders for each output image. Press
Setup to enter setup menu. Then press ↓ to select 2.Output image and press
OK to enter. Press ↑ or ↓ to select corresponding setting and rotate knob to
change parameters. Press OK to save.
Pic 6-4c LCD window: multi-windows output image setting
LVP909 can support 32 level brightness selection. To make sure of full gray scale
of output image, it always set as 32.
6-5 Other basic operation
1. Output brightness selection
BRT -
BRT +
Reduce LVP909 output brightness, the lowest is 0.
Increase LVP909 output brightness, the highest is 32.
Button Description
2. Output Image Border ( Image 1 )
2.5 Border No
2.6 Border R 255
2.7 Border G 255
2.8 Border B 255
2.9 Border Size 4
Pic 6-4d LCD window: multi-windows output image setting
93 94
LVP909 Series User Manual LVP909 User Manual Series