www.videowall.cn
17
LVP8601 User Manual
5-4 Configuration mode 4
Output
Matrix
In1
CH1
Out1
Config_Mode4
In2
In3
In4
CH2
CH3
CH4
Out 2
Out 3
Out 4
Figure 5-8
In this mode:
Out1= CH1 +CH2
Out2=CH3+ CH4
This means:
Out1 outputs the image generated by CH1 and CH2 overlapped;
Out2 outputs the image generated by CH3 and CH4 overlapped;
There are not outputs from Out3 and Out4.
In this mode, CH1 and CH2 respectively crop a part or full of In1 and In2.
The cropped images, in special sizes and locations, are edge-blended
and overlapped into a complete one and output from Out1; CH3 and CH4
respectively crop a part or full of In3 and In4. The cropped images, in
special sizes and locations, are edge-blended and overlapped into a
complete one and output from Out2. The settings of size, location, edge
blending and overlap can be found in the setup menu of output card. After
processing, images output from Out1 and Out2 are blended into a
complete one and the display is completely synchronous.
By using this mode, LVP8601 will be used for pixel-to-pixel sync image
mosaic and the maximal resolution supported is 4K x 2K.