30
/
37
unnecessary.
Auto detect of signals for output card
On the menu of “
Output Card Advanced Setup
”, press “
↑
,
↓
”
to
select “
Auto detect
”, turn the knob to adjust, and press “
OK”
to confirm.
Notice:
normally “Auto detect” is off, it is mainly used for malfunction
detec of input card. When “Auto detect” is on and In-D has
malfunction, the screen will be blank.
Channel reset
On the menu of “
Output Card Advanced Setup
”, press “
↑
,
↓
” to
select “
CH Reset
”, press “
OK
” to confirm.
Notice:
input signals for output cards will be briefly unstable when
making changes
in “Matrix K Setup” or “Matrix L Setup” and it will
lead to blurred or blank screen. “
CH Reset
” will restore the
system. Normally this operation is not necessary.
Refresh data
On the menu of “
Output Card Advanced Setup
”, press “
↑
,
↓
”to select
Output Card Advanced Setup
Out-L
--------------------------------------
1.Output port 1 Port
2.Auto Detect Off
3.CH Reset
4.Refresh Data
5.Reset Data
--------------------------------------
Output Card Advanced Setup
Out-L
--------------------------------------
1.Output port 1 Port
2.Auto Detect Off
3.CH Reset
4.Refresh Data
5.Reset Data
--------------------------------------