LVP605 User’s Manual
http://www.cnledsourcing.com
---------------------------------------------------------------------------------------------------
LED VIDEO PROCESSOR
21
Figure 5
As above figure shows: the size and location of the images in
LVP605 background and PIP
output window for the LED display are
defined by the following 8 groups of parameters:
Item
Description
1
Main_ Hori_Width
2
Main_ Hori_Start
3
Main_Vert_Height
4
Main_Vert_Start
5
PIP_ Hori_Width
6
PIP _ Hori_Start
7
PIP _Vert_Height
8
PIP _Vert_Start
Operating procedures:
Enter PIP/POP setup mode:
while PIP/POP mode is turned
on (make sure that Mosaic mode have been switched off), press
“
Setup
” button, then press the knob,
LVP605
will enter the first
setup item of
PIP/POP
setup mode. The information as follows will
appear in LCD:
Switch current PIP modes:
press mode buttons (i.e.: M1, M2,
M3, M4), the processor will directly switch current PIP modes.
Switch adjustment items:
press ”
↑
” and ”
↓
” to switch
current adjustment items.
Change output parameters:
user can change current
parameter settings by rotating the knob. The speed at which you
rotate the knob decides the step value of the adjustment. The
locations of the background and PIP will be previewed respectively
in the white rectangle and blue rectangle while you are making the
adjustment, then you can press the knob to save and validate the
settings you made.
Exit PIP/POP setup mode:
directly press “
Setup
” button while
in
PIP/POP
setup mode,
LVP605
will exit directly.
1.
Main_Hori_width
1216
？
PIP/POP Mode=M1
